Solid construction and good finish. Metal mill discs grind the grain as fine as you adjust it yourself. Manually controlled. Can grind very fine, or crush roughly as well. Ideal for the beer brewer !
 

"Homebrewer's best friend", rollers are adjustable at both ends to keep the gap spacing parallel giving a uniform crush along the entire length of the rollers.
The gap default setting is marked and set at .039 at assembly. Adjustment range is from .015 to .070 thousands of an inch.
The rollers have a 12 TPI knurl to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging.
Comes with a solid base with locators to center the Barley Crusher on a 5 gallon plastic pail. (Pail not included)
The standard hopper holds an even 7 pounds (optional large hopper holds 15 pounds). Hopper is of steel now, picture shows still the old version made of wood.
Using a 3/8 drillmotor (not included) at 500 RPM gives you a crush rate of 6 pounds a minute making the big grain bills fast and easy.
The Barley Crusher is shipped fully assembled. There are no adapters needed to use a 3/8 drill motor.
 

Still THE standard for hobbyist malt mills. With 2 big rollers (25 cm x 3,75 cm diam.) with special coarse structure for optimum grip on the grain. High capacity : up to 120 kg/hour. With self-lubricating bronze bearings. Can easily be motorised with an electric drill (not for extensive use) or motor. Lifetime factory warranty in hobbyist use.
The non-adjustable model provides very good screening. For optimum flexibility go for the adjustable model whose rollers are 2-way adjustable
 

Still THE standard for hobbyist malt mills. With 2 big rollers (25 cm x 3,75 cm diam.) with special coarse structure for optimum grip on the grain. High capacity : up to 120 kg/hour. With self-lubricating bronze bearings. Can easily be motorised with an electric drill (not for extensive use) or motor. Lifetime factory warranty in hobbyist use.
The non-adjustable model provides very good screening. For optimum flexibility go for the adjustable model whose rollers are 2-way adjustable.